Work flow of peanut picker

- Mar 26, 2018 -

When the peanut picker is working, it should be carried out according to the process flow.

When the peanut seedlings are fed, they must first fill the feeding mouth with the results of the peanut, and the feeding time should be even.

It is forbidden to feed hard objects such as stones, blocks and metal objects into the machine, so as not to damage the machine and cause personal accidents.

When working, it is strictly forbidden to put the hand into the feeding port, fan mouth and exhaust.

The operator should tighten up the sleeves, and the female comrade should wear the working cap.

If you hear abnormal sound or find fault, you must stop the machine to check and troubleshoot.

It is strictly forbidden to work overload.

Professional staff should be checked, adjusted and maintained at the end of each day.

Such as: grease, repair welding, etc.

When the drum is blocked, the feeding amount should be checked, the drying humidity of peanut seedlings, the tightness of the motor triangle belt, the power supply voltage, etc.

Adjust the clearance between the roller and the bottom of the sieve when the peanut picker is not clean.

The gap between the roller and the bottom of the sieve is easy to be picked.

When the peanuts contain more sundries, when the peanuts have been sucked out, adjust the air intake.

When sundry, reduce the intake;

Peanut small fruit has been sucked out, raise the air intake.

Related Industry Knowledge

Related Products

  • Concrete Block Making Machine
  • Cement Foam Concrete With Air Foaming Machine.
  • EPS Automatic Vacuum Block Molding Machine (Horizontal Sliding Door)
  • Support Balers
  • Factory Direct Sale Bag Dust Remover
  • Block Making Machine