The manufacturer introduces the maintenance and maintenance of the block machine.

- Feb 25, 2018 -

In the construction industry, all kinds of equipment are used, among which the block machine is one of the most widely used methods.

Block machine is mainly used to produce block and cement columns and stirrups, the use of block machine can speed up the construction of the construction efficiency, at the same time block block machine production, has the certain guarantee the quality of construction.

The daily maintenance of the block machine is very important. It can prolong the service life of the block machine and ensure the normal operation of the block machine. Then, how should the block machine be maintained?

Let me introduce you.

1. The padding machine can be added after normal operation, and the feeding material should be even, so as to prevent the mixing of hard objects.

2. When checking whether the fasteners are loose, the pressure plate screws of the pressing plate on both sides of the rotor should be inspected.

3. It is necessary to stop the feeding before the machine is down, and the material in the machine is broken and then the motor power is cut off.

4. When the pressure plate is loose, the two ends of the board are exposed to the rotor body, which is damaged by the collision with the body;

5, when the board hammer wear due to need to adjust the 180 ° when used again, should make every board hammer weight and balance, to prevent counterattack broken start after vibration

6. When the particle size of the cement block machine is too large, it should be stopped to check the wear of the board hammer to prevent the rotor from being worn out.

7. After repairing or adjusting the discharge port, the cement block machine should first use the manual rotation rotor to confirm that the rotor and other parts have no friction and jam and can rotate flexibly;

8. Always check whether the bearing seat seal is good. The grease in the bearing seat should be added every month, and all oil and oil should be cleaned and replaced every three months.

9. In order to ensure the safety of operators and equipment, it is forbidden to carry out repair, adjustment and cleaning in the operation of the block machine, and it is forbidden to open all kinds of small doors.

The emergence of the block machine has satisfied the demand of the market, which is especially helpful for the construction industry.

The maintenance of the block machine is introduced here. If the method we introduce can help you, please remember to pay attention to us.

You can visit our website or telephone to consult our factory for in-depth understanding.


Related Industry Knowledge

Related Products

  • Qty3-15 Concrete Block Machine
  • Fully Automatic Block Making Machine
  • 2-20m Diesel Interlocking Block Machine 2PCS/Mould
  • Qingzhong Small Cement Foaming Equipment
  • 10-15 Full-automatic Block Molding Machine
  • Vertical Mixer Concrete Equipment