- Jan 17, 2018 -
The mixer is widely used in the construction industry. The main function of the mixer is to stir the objects together so that we can use them.
In order to ensure the normal order of the mixer is used, and improve work efficiency, we must pay more attention when operating, avoid failure, today we will learn about the use of the mixer main considerations.
1. The mixer should be set in a flat position, and the front and rear axle of the square wood should be used to make the tires stand high and empty so as not to move around when moving.
2. The mixer should be protected by secondary leakage. After the power is switched on before going to work, it must be carefully checked, and it can be used only if it is considered qualified by the empty car test.
It is necessary to check whether the mixing speed is suitable for the test run. In general, the speed of the empty vehicle (after loading) is slightly faster than 2~3. If there is a large difference, the ratio of the driving wheel to the driving wheel should be adjusted.
3. The rotating direction of the mixing cylinder should be in accordance with the direction of the arrow, if it is not true, the motor wiring should be corrected.
4. Check whether the transmission clutch and brake are flexible and reliable, whether the steel wire rope is damaged, whether the track pulley is good, there are no obstacles around and the lubrication condition of each part.
5. After starting the machine, it is often noted that the operation of each part of the mixer is normal.
When the machine is down, check whether the blade of the mixer is bent, and whether the screws are falling or loose.
Pay more attention when operating, in addition to do a good job of maintaining a blender, so it can guarantee the use of the mixer performance, better reduce the happening of the fault, hope everyone after the knowledge, to better applied to the work.
Our company is engaged in the production and sales of mixers, we need friends to welcome you to inquire.