Wet dust removal plant Wet precipitator commonly known as "the mist eliminator", it is to make the dust and gas liquid (usually water) as close contact, use water and particle inertia collision or use the mix of water and dust and other function as capture particles or make particles...Send InquiryChat Now
Wet dust removal plant
Wet precipitator commonly known as "the mist eliminator", it is to make the dust and gas liquid (usually water) as close contact, use water and particle inertia collision or use the mix of water and dust and other function as capture particles or make particles increases in fixed container or the installation of water and dust separation effect.
The wet dust collector produced is a combination of water bath and spray.
First, the suction of a high pressure centrifugal fan is used to press the dust gas into a water tank with a certain height of water. The water bath will absorb some dust into the water.
After the distribution of the uniform distribution, the gas flows from the bottom up, while the high pressure nozzle is sprayed with water mist to trap the remaining dust particles.
Its filtration efficiency can reach above 85%.
A wet precipitator can effectively remove a liquid or solid particle with a diameter of 0.1-20 micrometers from air flow, and also remove some gaseous pollutants.
It has the advantages of simple structure, small footprint, easy operation and maintenance and high purification efficiency. It can handle high temperature and high humidity, and reduce the possibility of fire and explosion to the minimum.
However, it is necessary to pay special attention to equipment and pipeline corrosion and treatment of sewage and sludge.
The wet dust removal process is also detrimental to the recycling of by-products.
If the equipment is installed indoors, you must also consider the possible freezing of equipment in winter.
Moreover, if the efficiency of fine particles is removed, the liquid phase is better dispersed, but the energy consumption is increased.
The dust collector has a high efficiency of dust removal with a particle size of less than 5 mu m dust, which can last up to 5 ~ 8 years.
The dust collector has a compact structure, small footprint, small water consumption, and processing 5 ~ 7 cubic meters of dust air per second covers an area of about 4 square meters, and consumes about 1 ton per hour.