For many mechanical equipment, lubrication maintenance is often required in daily work, but there will be some problems caused by poor quality of lubricating oil, some even affect the normal production of mechanical equipment. Reinforcement spacers machine is the equipment that needs to be...Send InquiryChat Now
For many mechanical equipment, lubrication maintenance is often required in daily work, but there will be some problems caused by poor quality of lubricating oil, some even affect the normal production of mechanical equipment.
Reinforcement spacers machine is the equipment that needs to be constantly added lubricating oil for reinforcement in daily work. In order to enable it to work normally, we have studied the influence of oil viscosity on reinforcement spacers machine.
When reinforcement spacers machine lubricates, it often follows the principle of "more oil than less", which is because we know that less oil can result in insufficient oil supply and poor lubrication, resulting in mechanical accidents.
Therefore, reinforcement spacers machine cannot "prefer to add more" for fear of insufficient oil when refueling.
In fact, too much oil will not only increase the crankshaft power consumption due to increased rotational resistance, but also the oil is prone to bubbles, emulsification and leakage, resulting in poor lubrication.
Engine weakness and channeling oil can be solved with high viscosity oil of reinforcement spacers machine: engine weakness, cost of engine oil and reinforcement oil phenomenon are the external characteristics of engine deterioration, and the basis of "reinforcement spacers machine can solve the above problems with high viscosity oil" is insufficient.
On the contrary, it will increase the starting resistance of the engine, deteriorate the lubrication performance and aggravate the friction loss of the parts.
Engine oils with high viscosity are advantageous to the engine than those with low viscosity: selecting too high viscosity grade of lubricating oil will result in poor pumping performance and flow rate of the oil pump, and make its lubricity, catharsis and heat dissipation worse, and will easily cause semi-dry friction of the parts, causing tile burning, axle holding and other faults.
It is not difficult to see from the above information that the lubrication work of reinforcement spacers machine can not be solved by lubricating oil, and lubrication shall be added according to the actual use needs.