Introduction to the Automatic block machine, also called hydraulic automatic cement block machine is mainly producing all kinds of different concrete block, steel support, it is mainly used for building cast-in-situ, roads, railways, Bridges and buildings, the protective layer of reinforced...Send InquiryChat Now
Introduction to the
Automatic block machine, also called hydraulic automatic cement block machine is mainly producing all kinds of different concrete block, steel support, it is mainly used for building cast-in-situ, roads, railways, Bridges and buildings, the protective layer of reinforced concrete block machine, standard block support beam support, reinforced layer spacing, etc.
Cover the quality of the block machine, cement and steel reinforcement in concrete engineering is directly related to the structure of the bearing capacity, durability, resistance to acid and alkali. The situation such as fire prevention, the construction quality plays an important role, at present in the developed countries of irregular reinforced protective layer of cement mortar block machine has been eliminated, plastic reinforced cushion block also for a variety of defects is disabled, specification standard protective layer concrete reinforced cushion block, concrete block, steel block, concrete block has comprehensive promotion.
The working principle of
(1) the bottom die core of the brick machine is pushed out of the brick;
(2) the automatic material moving forward, the brick and push material filling cavity are introduced;
(3) the filling of the cavity is realized by the falling mold core at a time;
(4) the automatic material vehicle returns, completing the cavity packing and scraping away the excess material;
(5) the moving beam falls rapidly;
(6) the second drop of the mold core forces the material in the film cavity to become dense;
(7) the moving beam decelerates downwards and gradually approaches the material in the membrane cavity;
(8) close to the top of the material in the cavity and complete the slow pressure (also known as inertial pressure);
(9) one pressurization (i.e., low pressure pressure);
(10) one exhaust;
(11) press, secondary pressure (that is, medium pressure pressure);
(12) secondary exhaust;
(13) press and triple pressure (that is, high pressure);
(14) pressure protection;
(15) unloading pressure (high-pressure discharge);
(16) complete unloading pressure (middle and low pressure discharge);
(17) the moving beam rises slowly, and the adobe immediately rises rapidly after stripping.
(18) the lower die core (stripper cylinder) is rapidly moving out of the brick;
(19) the moving beam will rise rapidly and then decelerate to the highest limit and then stop;
Complete a work cycle of pressing bricks.
The characteristics of
1. Fully automatic block machine frame: it is made of high strength steel and special welding technology, which is extremely strong.
2. Block guide column: it is made of super special steel, with good anti-twist and abrasion resistance.
3. Mould pressing head: machine, electricity, liquid synchronous drive, the same plate product height error is very little, product consistency is good.
4 feeder, automatic block machine cloth: the sensor and the proportion of hydraulic drive technology, the swing car cloth and arch breaking mechanism, the produce centrifugal blowdown force, cloth quickly, particularly favorable to perforated pad products.
5, automatic block machine vibrator: driven by electro-hydraulic technology, multi-source vibration system, under computer control vertical synchronous vibration produced by hydraulic drive, frequency adjustable, realize the low-frequency charging, the working principle of the high frequency shaping of different raw materials can obtain good effect of vibration.
Molding box size (length * width * height) 690 * 535 * 20 mm molding blocks 200 mm (support) 33 root shape cycle 13 to 15 seconds/time design production capacity of 200 mm (cement) 90000 root/vibration frequency 4500 times/min - 5100 times/min vibration 22 kn oil cylinder top 63 * 300 stem diameter 32 cylinder 63 * 300 pole diameter hydraulic system pressure rated 6.3 mpa installed capacity of 11.5 km the weight 4800 kg machine appearance size 4000 * 3500 * 2300 mm
The rated pressure
Oil pump limit pressure
The motor power
Pressing open height
Open height of ejection cylinder.
Suppression of mesa
Mesa of the mold