What inspection should be done when installing the non-burning brick machine

- Mar 16, 2018 -

Baking-free brick machine in the production of good, because of a variety of other factors such as long-distance transportation, may cause the equipment appear some problems, so the installation of some check is very necessary.

The following inspection should be carried out when installing the brick machine: 1. Check whether the brick machine is damaged or deformed during transportation (especially the hydraulic pipe).

2. Check whether the fasteners in the main parts of the brick machine are loose.

3. Check the reducer.

Whether the oil cylinder of the shaking table and the lubrication points are filled according to the requirements, the oil quantity is appropriate.

4. In addition, a comprehensive wipe work should be carried out on the non-burning brick machine, and the relative sliding parts of each moving part should be lubricated in accordance with the regulations before the test.

If the transportation need to machine apart can be divided into forming device, the plate device, feeding device, a brick device, stacking device, electronic control device, etc., according to the assembly relationship between assembly in place when you install.

Understand the inspection of the installation of the brick - free brick machine, I believe that you will be more comfortable in the future use.

It is also hoped that you will be able to remember these checks in future use to avoid unnecessary losses.


Related Industry Knowledge

Related Products

  • Baghouse
  • Mold for Concrete Mobile Concrete Block Making Machine
  • Hammer mill pulverizer
  • Cement Plant Bag Filter
  • Support Block Machine
  • Hydraulic Cement Block Machine