- Mar 20, 2018 -
Block machine is mainly is the production of various kinds of related equipment, such as cement block, their use is also better for the production and processing of our products has brought more benefits, with the constant development of our society in the use of block machine is better for our building and road construction provides a lot of convenience.
Before the repair: try working for a few minutes before production, check the equipment, such as buttons, switches, valves, limit is flexible, admits hydraulic system pressure is normal, after homework beam movement sensitive, start work again.
It is necessary to understand the structure and function of the static pad block machine.
You can't start the machine without training.
Check whether the fasteners of the static pressing block machine are reliable, and the operating parts and sliding surfaces are not blocked, and the limit equipment and safety protection equipment are not reliable.
Rule in operation: the static pressure pad machine is not repaired during the operation.
When the static pressure pad machine is abnormal in operation, the operation should be aborted immediately and the operation will be done after the professional repair.
The static pressure pad machine equipment cannot be overused, and the pressure workpiece should be concentric with the center of the operation center and the main shaft, and the cushion is stable.
It is forbidden to use the oil cylinder overstroke, and it is forbidden to process when the pressure or pressure is unloaded.
It is forbidden to adjust the regulating valve and pressure gauge, and check the pressure gauge regularly.
Special attention should be paid to: when applying pressure, the switch of the pressure gauge can be closed to extend the service life of the pressure gauge.
If the equipment is not used for a long time, the processing surface should be cleaned and coated with anti-rust oil, and the total power supply should be closed.
Reasonable use of the product can help us better for the development of products, so we in the development process of the products also must according to the characteristic of the product to better help the development of our products and the development of our industry.