- Jan 25, 2018 -
In the process of production, the two states that we want to achieve are that we can produce high-quality products, while in the process of production, we can also save a large amount of cost.
This is what we want to achieve, and we can solve these two problems very well when we make the blocks and bricks without the brick machine.
At the same time, there will be some problems in the production process. The following is the solution for you.
(1) the production of power equipment, hydraulic pressure and vibration collection box there is no perfect match, the pressure is too large, or vibration time is too short, this solve the problem, can speak extended or replacement motor vibration time, reduce the outbound oil pressure of hydraulic pump station.
(2) the production of raw materials, production of unburned brick block machine equipment raw material is fly ash, coal gangue and so on some abandoned, passes through water, and cement, by fully mixing, fusion, and have a certain proportion can ensure the quality, in the raw material to produce, in the process of ascension, the material sticking in the mold, it is not easy to release, will be die with broken, is out of the drum in the middle of the phenomenon, this is relatively easy to solve, according to certain proportion, the materials will be a lot of experiments, find out the suitable method, after the production according to certain proportion of production line.
Later when we encounter these problems, it can be handled in accordance with the method of baking-free brick machine equipment manufacturers to provide, at the same time the production process, also should pay attention to the change of the production quality of the product, there is a problem, timely solve, and then put into production again.
If you have any problems in the process of using the brick machine, you are welcome to contact us.