The cleaning method of the block machine

- Jan 19, 2018 -

Block machine has applied in many industries, the use of block machine after a long time, dust is inevitable, and internal have sundry, this time we need to clean, to block machine clean also is to have cultured, can not blindly go to work, so we need to understand the knowledge of the cleaning, then go to clean, so how do we clean block machine?

image.png

Here is the introduction of the machinery factory in qing dynasty.

The cleaning of the pad machine is not simply a matter of cleaning the surface of the dust.

Before cleaning must first check whether the operation of whole machine is normal, another is to check whether there is sundry inside the machine, if you have to clean up in time, and then check block machine inlet is for raw material, this is to ensure that in the absence of raw material. The user has to do is check to see equipment have any clutter power section and parts.

The block machine should be installed on the concrete base of the horizontal, and the anchor bolt is fixed.

When installing, pay attention to the vertical of the main body and level.

After installation, check whether the bolts of each part are loose and the main door is fastened.

All the load bearing for machine, so good lubrication for the bearing life has a lot to do, it directly affects the service life of machine and availability, and requirements into lubricating oil must be clean and seal must be good, the machine's main oil, rotating bearing, roller bearing, all gear, bearing, sliding plane. The tire of the installation are prone to loose should be check regularly.

Pay attention to the degree of wear and tear of the worn parts and replace the worn parts at any time.

Put activity unit chassis plane, should be out dirt and other material to avoid activities bearing when machine can't broken material can't move on the chassis, so that a serious accident, bearing high oil temperature rise, should immediately stop to check the reason.

After we know the block machine cleaning methods, in the later work to block machine regularly clean, at the same time we also want to a certain block machine maintenance and maintenance, so as to reduce the rate of mechanical failure, at the same time guarantee the life of the block machine.

I hope our introduction will help you.

Qingzhong machinery factory is engaged in the production and sales of block machine, block forming machine, we have this demand to welcome you to inquire.


Related Industry Knowledge

Related Products

  • High Pressure Brick And Paver Block Vibro Machine
  • Mould/Brick Mould/Block Mould/Mold for Block Machine
  • Steel Protection Layer Block Machine
  • Block Making Machine
  • Environmental Block Molding Machine
  • Burn Free Block Forming Machine