Precautions for the first test of a brick - free brick machine

- Jan 18, 2018 -

Baking-free brick machine before the formal use, we will trial run, so that a comprehensive range of observation components are in good condition, can guarantee the machine can run normally, at the time of commissioning and there are lots of things we need to pay attention to, so as to better complete the commissioning, so what are the considerations?

image.png

The introduction of the machinery factory in xiushi qingzhong, to understand together.

1. During the first test, you must filter with the manual tray.

The length of the supporting plate and the thickness error remain below 2mm, in case the card board is damaged.

2. For the hopper bottom to keep consistent with the mould surface, checking and adjusting, using a certain time shall be for the hopper to return after can blow back to the remaining material, also can clear the head surface sticky material, scraper to set up and down, excessive wear should be timely conversion.

3. Check whether the brick machine is clean and find a bonded material block. It must be shoveled off before it can be fed into the base plate of the machine.

The time of vibration pressure should be strictly controlled. If necessary, it can control the amount of material. Keep in mind that the limit of each process is normal and the screws are loose. If there is any accident, the adjustment should be stopped in time.

4. Check the power supply of the non-burning brick machine including check the grounding wire of the electrical part to avoid leakage and short connection.

5. The hydraulic system should be transferred to the rated pressure, wash oil screen on schedule, the oil filter at least once a year, often regularly check on the hydraulic system, safety and prolong the effect of the product life do parts.

Many users ignore baking-free brick machine commissioning work, this kind of practice is wrong, we want to make the machine normal operation, you should first check the parts whether there is any problem, we do not conduct commissioning work, will be very easy to cause failure at work, so we must not forget in the future work of commissioning work.

For more information, please pay more attention to our website.


Related Industry Knowledge

Related Products

  • Large High Pressure Cement Foaming Machine
  • 20 Low Pressure 30 High Pressure Cement Foaming Machine
  • Support Balers
  • Qingzhong Support Baling Machine
  • Concrete Block Machine
  • Block Forming Line