Fully Automatic Block Machine

Fully Automatic Block Machine

At present, there are two main types of cement block machine: 1. The manual manual pad machine is to install the vibrating motor in the steel frame, and the mould is placed on the frame. Place the concrete in the mold and start the shaker. After the concrete is evenly filled into the mold, the...

Send InquiryChat Now

Product Details

At present, there are two main types of cement block machine:

1. The manual manual pad machine is to install the vibrating motor in the steel frame, and the mould is placed on the frame.

Place the concrete in the mold and start the shaker.

After the concrete is evenly filled into the mold, the mold can be released, with an average of 2 minutes.

Each person can produce 3, 000 blocks per day.

The raw material is cheap, the production process is simple, 50-100 square meter workshop, 3-5 person annual output value can reach 1 million yuan, investment small output is high.

2, automatic hydraulic press Automatic cement block machine is advanced in the current domestic industry, the ideal production equipment, specializing in the production of concrete concrete this equipment design is reasonable, high degree of automation, cover an area of an area small, high production efficiency.

The equipment is specialized in the production of various types of concrete concrete blocks...


The cement block machine master should produce various kinds of cement blocks, special-shaped concrete blocks, steel reinforcement and so on.

With flexible structure and fast laying, it is convenient for the use of high-rise buildings, which is conducive to protecting the environment, protecting the surrounding environment and improving the construction speed.

Cement block has strong permeability, rainy days, the water can permeate through the ground, the road block using small laid, have interlocking function, block and between blocks filled with fine sand, additional gross brick has a certain roughness, has the ideal of friction.

There are many problems in the current production of cement block machine, reinforced concrete block machine and concrete block machine, and the parameters of the vibrating forming process are not reasonable, not too large or small.

Basically, the smaller the actual area of the pressure surface of each product, the more the number of the products.

To see mesa size should be greater than the mold size, pay attention to the combination of the whole mechanism can adjust the product of the reinforced concrete beam, plate, column, wall base layer control in the range of allowable effectively, fully in conformity with the relevant provisions of the state.

My company mainly produces all kinds of block machine, its main products are: cement block machine, reinforced cushion block machine, concrete block machine and other products, for block machine, I think we should have heard more, block machine is used to make block, steel protective equipment pad originally demand is not big, the original small cottage processing methods are big enough for the market.

The block machine is manufactured by the hydraulic system and the mechanical system.

Why do we need this structure?

One reason is the shape of the block machine!

The block machine is generally irregular shape, and the appearance size is generally relatively small, so must ask for the block to form the time need certain pressure!


Technical parameters of cement block machine:

Molding blocksPorous brickThe oil pumpPlate specificationThe weightOverall size of the machine.

Mold size (length x width x height)

660×535×20mm

10 blocks of pavement


Molding blocks

200 supports 36 blocks

Hollow block

3block 390×190×190mm

The molding cycle

15 seconds/time

Design capacity

Road block 19200 block/class 10 / mold.

8000-12000Block/class


The vibration frequency

4600 times/min - 6100 times/min.

Vibration force

~22KN

Vibrator power

Y132S1-2 N=6KW

Cb32 flat or so Q=40ML/r p=10mpa.


Top oil cylinder

63 x 300 size 32

While oil cylinder

63×250 size 32

Hydraulic system rated pressure.

27.5mpa

The installed capacity

14.5kw

700×540×6mm


~4800kg


~6000×3500×2300mm



And according to the demand of the market continuously to carry on the technical innovation to the equipment, the production advanced equipment, welcome the general user to come to our company field inspection, can the field test machine operation.



Supply all kinds of models of block machine equipment, reliable quality, cost-effective, have many years of block machine production experience, production of block machine, cement block machine, support block machine, high-speed rail bridge block machine.

Block machine vibration and static pressure of the points from the overall situation, from the shape is divided into three beam gantry and four column block machine, ding ke production is a new type of three beam four-column type, the tripod with two handles more than ten years of unremitting efforts, block machine grinding tool development so far, already has more than 50, replaced different abrasive production: cement support: 20 cm and 25 cm, 30 cm and 35 cm, 40 cm, 50 cm, stirrup, the plum blossom, tripod, module of inspection Wells, the road tile abnormity grinding tool, such as ding family support customized all kinds of grinding tool.


Contact Us:

Huaxian Qingzhong Machinery Factory

Add: Chengguan Industrial Park(Donghuan Road), Huaxian, Anyang City, Henan Province, China

Tel: +86-373-7078980 

Phone: +8615893802694

E-mail: hxqzjxc@126.com

www.hnblockmachine.com


Hot Tags: fully automatic block machine, manufacturer, supplier, factory, for sale
Related Products

Inquiry

  • Your Name:
  • *E-mail:
  • Phone:
  • Company:
  • Title:
  • *Content: