Concrete Cover Block Machine

Concrete Cover Block Machine

The concrete cover block machine mod. 1021 is a CE approved machine for the production of concrete blocks withvariable height between 60 mm and 300 mm. The range of applicable moulds is virtually endless. Any type of concrete products may be produced, from selflocking blocks to road kerbs. It’s...

Send InquiryChat Now

Product Details

The concrete cover block machine mod. 1021 is a CE approved machine for the production of concrete blocks withvariable height between 60 mm and 300 mm. The range of applicable moulds is virtually endless. Any type of concrete products may be produced, from selflocking blocks to road kerbs.

It’s a fully automatic, self-propelled machine, with vibro-compression operation, working on a sliding, wear resistant plate. This solution is better than working directly on a track. The steel plate gives in fact better finishing and size control. Pressing performance is also better, and any problem of the material sticking to the track is avoided. In case of solid and particularly heavy, such as kerbstones, direct on track operation is also possible.

Double frame, one fixed and one mobile section, driven by hydraulic systems. Fixed steel plate position. This enable switching to moulds with different heights (e.g. kerbstones after moulds) in just a few minutes.

An electromechanical-hydraulic system, consisting of a series of cams and limit switches, is used to ensure safe operation also in bad conditions

(humidity, dust, inconsistent voltage).

Grids, protection bonnets and front bar for obstacle detection, connected to the machine protection circuit, ensure consistently safe working conditions thanks to safety circuit breakers with forced opening of the normally open contact.


Technical specifications

Hopper capacity 1500 l

Lateral vibrator power 2 x 3 kw

Upper vibrator power 2 x 2,3 kw

Hydraulic unit power 11 kw

Tank oil capacity 100 l

Shake-out dimensions

Length 1.070 mm

Width 1.050 mm

Height minimum 60 mm

Height maximum 300 mm

Steering diameter 8,8 m

Drive speed 20,7 m/min

Total installed power 31,1 kw

Total absorbed power 19,8 kw

Total weight without mould 6.370 kg

Total volume without mould 21,22 m3

Transport dimensions

Length 4,93 m

Width 2,25 m

Height 2,30 m


Hot Tags: concrete cover block machine, manufacturer, supplier, factory, for sale
Related Products

Inquiry

  • Your Name:
  • *E-mail:
  • Phone:
  • Company:
  • Title:
  • *Content: